Support answer · Using Your Robot
How do I properly store my Dolphin?
Short answer: After each cycle, remove your Dolphin from the pool and store it and its power supply away from direct sun, extreme temperatures and pool chemicals.
Based on Maytronics support, updated 2026-07-22, rewritten by Poolbots' pool experts. Applies to 58 models.
The answer
What to know.
Image shown for illustration only.
After each cleaning cycle
Take your Dolphin out of the pool after every cleaning cycle. Store the robot and its power supply away from direct sunlight and excessive heat or cold to help prevent premature wear.
Keep the robot on a Dolphin caddy in a shaded spot. Coil the cable carefully so it does not kink.
Power supply placement
Use the power supply in a covered, shaded location that protects it from outdoor conditions, including rain, heat and cold.
Mount the power supply on the Dolphin caddy or set it on a raised surface away from the pool edge. Keep it at least 12 ft from the pool.
Offseason storage
When putting your Dolphin away for the season, store it on the caddy in a sheltered, well-ventilated area with a temperature between 41°F and 113°F.
Keep both the robot and power supply a reasonable distance from pool chemicals. Strong chemical fumes can cause corrosion over time.
Source: Maytronics support. Same steps and facts, rewritten for clarity; the videos and illustrations are Maytronics' own.
By model
This answer on your robot.
Maytronics tags this answer for the 58 models below.
Still need help?
