How do I get started with my Dolphin?

Unpack your Dolphin and remove all plastic wrapping before setting it up.

1. Step 1Prepare your Dolphin and power supply

   • If your robot has white climbing rings, remove the plastic wrapping from those rings before the first cleaning cycle.
   • Position the power supply at least 12 ft (3.5 m) from the pool edge. Choose a shaded spot if possible. The power supply is splash-proof, not waterproof.
   • Caution: Using an extension cord is not recommended.
   • Measure the longest part of your pool to estimate how much blue cable you need. Unroll only enough cable for the robot to reach the entire pool. Keep the extra cable coiled outside the pool.
   • Connect the blue cable to the power supply. Match the connector plug to the notch on the power supply connection, then turn it clockwise until secure.
   • Plug the power supply into a power outlet, but leave it turned off for now.
   • Place your Dolphin in the water midway along the longest part of the pool.

2. Step 2Let your Dolphin sink

   Allow the robot to settle on the pool floor. If it has foam brushes or brushes with foam rings, press them into the water until they are fully soaked.

3. Step 3Start the cleaning cycle

   Press the ON/OFF button on the power supply to start your Dolphin.

Pool preparation and filter tips

Dolphin robots are designed for routine cleaning after you have completed the initial spring cleanup, started the pool filtration system, balanced the water chemistry, and removed major debris with a pool net.

Dolphin robots can be equipped with fine spring filters, ultra-fine filters, or both:

• Fine spring filters collect larger debris, including leaves, grass, and twigs. These filters are recommended for initial spring cleaning.
• Ultra-fine filters collect smaller particles, including sand and dust.

During and after cleaning

• Some models have adjustable handles that control the robot's speed while it cleans the waterline. Learn about Dolphin handles and floats.
• Never pull the robot by its cable while it is running.
• Your Dolphin shuts off automatically when the cleaning cycle finishes. If you stop it early, such as when the filter is full, turning it back on starts the cleaning cycle again from the beginning.

Find instructions for your model

For more information about your robot's features, look up its user manual. You will need your Dolphin model or serial number.

Applies to these models

Dolphin Wave 120, Dolphin Wave 100, Dolphin Sigma, Dolphin M400, Dolphin Wave 60, Dolphin Oasis Z5i, Dolphin Wave 80, Dolphin Nautilus CC Supreme, Dolphin Explorer E40, Dolphin ADVANTAGE, Dolphin Nautilus CC, Dolphin Proteus DX3, Dolphin Echo, Dolphin S100, Dolphin Nautilus AG, Dolphin Premium 10, Dolphin T15, Dolphin Cayman, Dolphin Premium 20, Dolphin T25, Dolphin Active 10, Dolphin S50, Dolphin Active Solo, Dolphin Active 15, Dolphin Escape, Dolphin ADVANTAGE ULTRA, Dolphin S200, Dolphin Quantum, Dolphin Active 20, Dolphin ADVANTAGE PRO, Dolphin Proteus DX4, Dolphin Nautilus CC Pro, Dolphin Proteus DX5i, Dolphin S300, Dolphin Active 30, Dolphin Premium 30, Dolphin T35, Dolphin Premium 40, Dolphin T45, Dolphin Explorer E30 WiFi, Dolphin T55i, Dolphin S400, Dolphin Active 40, Dolphin Explorer E50, Dolphin Premier, Dolphin Nautilus CC Plus, Dolphin Explorer E25, Dolphin Nautilus CC Plus WiFi, Dolphin Nautilus Titan, Dolphin M550, Dolphin Premium 60, Dolphin M600, Dolphin T60, Dolphin Explorer E70, Dolphin W20, Dolphin Wave 300 XL, Dolphin Wave 140, Dolphin Wave 200 XL