Genuine Maytronics part · Brushes & Climbing Rings
Active Brush Assembly S1, Grey
Part number 9995544-ASSY · UPC 810071221781 · 1 year part warranty
Genuine Maytronics grey active brush assembly for Dolphin Nautilus CC, Dolphin E10 and Dolphin Cayman.
$19.99 MSRP
Out of stock
About this part
What it does and when to replace it.
The Active Brush Assembly S1, Grey is a genuine Maytronics replacement for the active brush on compatible Dolphin robots. It uses a standard brush to scrub pool surfaces during cleaning.
Maytronics lists part 9995544-ASSY for Dolphin Nautilus CC, Dolphin E10 and Dolphin Cayman, among other models. Poolbots does not currently stock this part. Contact Poolbots' pool experts by live chat or phone to confirm fit for your exact robot.
- Use part number 9995544-ASSY when asking Poolbots' pool experts to identify this replacement.
- Confirm fit by the full robot model name, not by brush color or appearance alone.
- Inspect the brush for tears, wear and cracks when you clean the robot.
Compatibility
Fits these Dolphin robots.
Confirmed by Maytronics' compatibility checker and each robot's own spare-parts list.
Also listed by Maytronics for: Dolphin ADVANTAGE, Dolphin Nautilus CC, Dolphin Proteus DX3, Dolphin Echo, Dolphin E10, Dolphin T15, Dolphin Cayman, Dolphin T25, Dolphin Active Solo, Dolphin Active 15, Dolphin Explorer E20, Dolphin Active 10, Dolphin Escape, Dolphin Encore, Dolphin PoolBot PB10, Dolphin Evolution 10, Dolphin Avalon 20, Dolphin IZZY CLIMB, Dolphin Cainan 1, Dolphin ENERGY C, Dolphin EX10, Dolphin FORMULA 20, Dolphin PoolBot PB20, Dolphin CLASSIC LIGHT, Dolphin PoolBot PB25, Dolphin Seamaster CL, E10, Dolphin RUN 10, Dolphin MR 20, ZFUN, Dolphin ZFUN, Dolphin Blue Maxi 10, Dolphin Blue Maxi 20, POOLSTYLE, Dolphin SM 10, Dolphin POOLSTYLE, Dolphin SX 10, POOLSTYLE PLUS, Dolphin FON 20, Dolphin SM 20.
Do it yourself
How to replace it at home.
Switch off and unplug the power supply.
Remove the robot from the pool and place it on a stable surface.
Follow the brush replacement procedure for your exact model to remove the old assembly.
Install the replacement assembly using the same model-specific instructions.
Check that the assembly is securely seated before reconnecting the power supply.
Step-by-step answers for this kind of part
How do I replace the climbing rings on my Dolphin brushes?Video20 min
These steps apply to all Dolphin models equipped with climbing rings.
-
Step 1: Soak the existing climbing rings Soak the rings in the pool, or leave them in water for 10 minutes. Make sure they are completely soaked before continuing.
-
Step 2: Turn the robot over Take the robot out of the pool and place it upside down.
-
Step 3: Check that the power is unplugged Confirm that the power supply is disconnected from the outlet before working on the brushes.
-
Step 4: Release the brush With a flathead screwdriver, release both sides of the brush from their sockets.
-
Step 5: Take out the brush Remove the released brush from the robot.
-
Step 6: Remove the old rings Take the existing climbing rings off the brush.
-
Step 7: Fit the replacement rings Let the new climbing rings soak in water until they are flexible. Work them onto the brush.
-
Step 8: Reinstall the brush With the new rings in position, slide the brush into its sockets. Press it into place.
Brush removal and installation videos
These videos show how to remove and reinstall the brushes. Use them as a reference for steps 2-5 and 8.
M Line (DX3/Sigma/Nautilus CC Plus/Nautilus CC Supreme/M400)
M600 (Active 60, Explorer E70)
For help finding replacement climbing rings, contact Poolbots' pool experts by live chat or phone.
How do I replace the brushes on my Dolphin robot?Video30 min
Disconnect the power supply from the electrical outlet before starting. Find the front, middle, or rear brush section below, then follow the video and instructions for your model.
For help choosing a replacement brush, contact Poolbots' pool experts by live chat or phone.
Front brush
S50 (E10, E20/E25, Active 10, Cayman, Escape, Encore)
Replacement front brush: 9995544-ASSY.
- Disconnect the power supply from the electrical outlet.
- Turn the robot over so its underside faces up.
- Take the tracks off the robot.
- Use a flathead screwdriver to remove the wheel disk.
- Turn the wheel until you can see the drive gear's retaining screw through it.
- Loosen and remove the screw, then take out the white drive gear.
- Ease the old brush out gently.
- Slide the replacement brush into position. Put the drive gear back and secure it with its screw.
- Put the wheel cover and tracks back on.
- Turn the brush by hand to check that it moves smoothly.
S100 (Advantage, Proteus DX3, Saturn, Echo, Nautilus CC, Active 15, Cayman, Escape, Explorer E20)
- Disconnect the power supply from the electrical outlet.
- Turn the robot over so its underside faces up.
- Take the tracks off the robot.
- Use a flathead screwdriver to remove the wheel disk.
- Turn the wheel until you can see the drive gear's retaining screw through it.
- Loosen and remove the screw, then take out the white drive gear.
- Ease the old brush out gently.
- Slide the replacement brush into position. Put the drive gear back and secure it with its screw.
- Put the wheel cover and tracks back on.
- Turn the brush by hand to check that it moves smoothly.
S200 (E30, Advantage Ultra, Active 20, Quantum, T35, Triton PS)
- Disconnect the power supply from the electrical outlet.
- Take the tracks off the robot.
- Use a Phillips screwdriver to remove the four screws securing the brush.
- Lift out the old brush.
- Fit the replacement brush and secure it with the four screws.
- Turn the brush by hand to check for smooth movement.
S300 & S400
S300 (E35/E35i, Proteus DX5i, Active 30, T35/T45, Premium 40, Explorer E30, E40i, Active 30i, T55i)
S400 (E50i, Active 50, Explorer E50)
- Disconnect the power supply from the electrical outlet.
- Take the tracks off the robot.
- Use a Phillips screwdriver to remove the four screws securing the brush.
- Lift out the old brush.
- Fit the replacement brush and secure it with the four screws.
- Turn the brush by hand to check for smooth movement.
M400/M500 (Sigma, Oasis, Nautilus CC Supreme, Aquarius XL, C4)
- Gently push the brush out with a flathead screwdriver until it releases.
- Position the replacement brush where the old one sat.
- Press the brush inward until it is seated.
- Turn the wheels to check that the brush moves properly.
M250 (Nautilus CC Plus, Dx3, Zenit 20)
Follow the video for the front-brush replacement procedure.
Premier
Follow the video for the front-brush replacement procedure.
Middle brush
M400/M500
- Disconnect the power supply from the electrical outlet.
- Turn the robot over so its underside faces up.
- Remove the four screws securing the brush, one at each corner.
- Lift the brush out of the robot.
- Fit the replacement brush in the same position as the old one.
- Reinstall all four screws and tighten them.
Sigma
Replacement middle brush: 9995541-R1.
This middle-brush procedure applies to Sigma produced in 2026 or later.
- Disconnect the power supply from the electrical outlet.
- Turn the robot over so its underside faces up.
- Remove the four screws securing the brush, one at each corner.
- Lift the brush out of the robot.
- Fit the replacement brush in the same position as the old one.
- Reinstall all four screws and tighten them.
Rear brush
S200 (E30, Advantage Ultra, Active 20, Quantum, T35, Triton PS)
Replacement rear brush: 99955380-ASSY.
- Disconnect the power supply from the electrical outlet.
- Turn the robot over so its underside faces up.
- Take the tracks off the robot.
- Carefully free the brush from the notches on both sides, then remove it.
- Fit the replacement brush where the old one sat.
- Put the tracks back on both sides.
- Turn the brush by hand to check for smooth movement.
S300 & S400
S300 (E35/E35i, Proteus DX5i, Active 30, T35/T45, Premium 40, Explorer E30, E40i, Active 30i, T55i)
S400 (E50i, Active 50, Explorer E50)
Replacement rear brush: 99955380-ASSY.
- Disconnect the power supply from the electrical outlet.
- Turn the robot over so its underside faces up.
- Take the tracks off the robot.
- Carefully free the brush from the notches on both sides, then remove it.
- Fit the replacement brush where the old one sat.
- Put the tracks back on both sides.
- Turn the brush by hand to check for smooth movement.
M400/M500 (Sigma, Oasis, Nautilus CC Supreme, Aquarius XL, C4)
Replacement brush assembly: 99955340-ASSY.
- Gently push the brush out with a flathead screwdriver until it releases.
- Position the replacement brush where the old one sat.
- Press the brush inward until it is seated.
- Turn the wheels to check that the brush moves properly.
M600/M700 (Active 60, E60i, Explorer E70)
Replacement rear brush: 99955340-ASSY.
- Disconnect the power supply from the electrical outlet.
- Turn the robot over so its underside faces up.
- Take the tracks off the robot.
- Carefully free the brush from the notches on both sides, then remove it.
- Fit the replacement brush where the old one sat.
- Put the tracks back on both sides.
- Turn the brush by hand to check for smooth movement.
M250 (Nautilus CC Plus, Dx3)
Follow the video for the rear-brush replacement procedure.
M550
Follow the video for the rear-brush replacement procedure.
Specifications
Product Info
- Active Brush
- Yes
- Brush Type
- Standard Brush
General Info
- Warranty (years)
- 1
- UPC
- 810071221781
Questions
Active Brush Assembly S1, Grey, answered.
Which Dolphin robots use part 9995544-ASSY?
Listed models include Dolphin Nautilus CC, Dolphin E10, Dolphin Cayman, Dolphin ADVANTAGE, Dolphin Proteus DX3 and Dolphin Explorer E20. Other models are also listed. Ask Poolbots' pool experts by live chat or phone to confirm your exact model.
Can I buy this part from Poolbots?
Poolbots does not currently stock 9995544-ASSY in its own store. This page helps identify the replacement. Contact Poolbots' pool experts by live chat or phone for help checking fit.
What warranty is listed for this brush assembly?
Maytronics lists a 1-year part warranty for 9995544-ASSY.
Brushes & Climbing Rings
