Support answer · Use & Maintenance
How do the features on the EON 100/120d work?
Short answer: Use the MaytronicsOne app to control cleaning, UltraRun™ to schedule cycles, and Homing Wall to choose where your robot parks.
Based on Maytronics support, updated 2026-01-07, rewritten by Poolbots' pool experts. Applies to 1 model.
The answer
What to know.
MaytronicsOne app
With the robot out of the water, you can use the MaytronicsOne app to:
- Choose cleaning modes and the scanning type.
- Select your preferred parking wall.
- Schedule weekly cleanings.
- Check the filter level status and water temperature.
Learn how to connect to the MaytronicsOne app
UltraRun™ Mode
UltraRun™ schedules cleaning so your robot can stay in the pool between charges:
- EON 100: Up to one week.
- EON 120d: Up to 2.5 weeks.
Set UltraRun™ using the robot's interface or the MaytronicsOne app. You can adjust the scanning and cleaning modes to suit your pool.
Steps Jet Cleaning
JETIQ™ technology and dual-drive brushes help the robot climb and clean steps. Step cleaning works in Full and Ultra-Clean Coverage cycles, and in UltraRun™ cycles up to one week.
Homing Wall
Homing Wall sends the EON 100/120d to your preferred wall to park after each cleaning cycle. This also applies to UltraRun™ cycles. Use the app to choose or change that wall.
Learn how to set or change the Homing Wall
Clicker
The Clicker helps you pick up and remove the robot from the pool. It comes with the EON 120d. The EON 100 is compatible with the Clicker, which is available as an optional accessory.
For help buying a Clicker, contact Poolbots' pool experts by live chat or phone.
Source: Maytronics support. Same steps and facts, rewritten for clarity; the videos and illustrations are Maytronics' own.
By model
This answer on your robot.
Maytronics tags this answer for the 1 model below.
Still need help?
