Support answer · Use & Maintenance
How do the features on my Liberty 600 work?
Short answer: Your Dolphin Liberty 600 offers app controls, Eco Mode scheduling, step and sun-ledge cleaning, and parking at a preferred wall.
Based on Maytronics support, updated 2025-03-19, rewritten by Poolbots' pool experts. Applies to 1 model.
The answer
What to know.
MaytronicsOne App
Use the MaytronicsOne App while your Dolphin Liberty 600 is out of the water to:
- Adjust cleaning modes.
- Choose your preferred homing wall.
- Check battery status.
- Schedule weekly Eco Mode cleanings.
More about connecting to the MaytronicsOne app!
Eco Mode
Eco Mode schedules cleanings so your robot can stay in the pool for up to two weeks before it needs recharging.
Set Eco Mode on the robot's interface, or use the MaytronicsOne app for more detailed settings.
Sun Ledge and Jet Cleaning
The Liberty 600 uses step detection to climb steps and sun ledges. As it descends, it activates a water jet to flush dirt and debris from the steps. The rear brush scrubs the sun ledge during cleaning.
These features operate in the Full, Ultra-Clean Coverage, and 1/2 – 1 week Eco Mode settings.
For the best sun-ledge cleaning results, the water should be 14 inches deep. Performance may vary on sun ledges with a water depth of 12 to 14 inches.
Homing Wall
After each cleaning cycle, the Homing feature parks your Dolphin Liberty 600 at the wall you chose. This also applies to Eco Mode cycles.
Use the app to select your preferred wall or change your selection.
Source: Maytronics support. Same steps and facts, rewritten for clarity; the videos and illustrations are Maytronics' own.
By model
This answer on your robot.
Maytronics tags this answer for the 1 model below.
Still need help?
