Support answer · Use & Maintenance
How do I get started with my Liberty 600?
Short answer: Fully charge your Dolphin Liberty 600, connect it to the MaytronicsOne app, then place it in at least 3 feet of water to start cleaning.
Based on Maytronics support, updated 2026-03-31, rewritten by Poolbots' pool experts. Applies to 1 model.
The answer
What to know.
Follow these steps to get your Dolphin Liberty 600 ready for its first cleaning.
-
Step 1: Connect the charger Attach the charger to the robot.
-
Step 2: Plug in the charger Connect the charger to an electrical outlet.
-
Step 3: Wait for a full charge Let the robot charge until all 3 bars show solid green. It needs to be fully charged before you get started.
-
Step 4: Disconnect the charger Unplug the charger from the outlet first, then disconnect it from the robot.
-
Step 5: Power on and connect the app Turn the robot on using its power button. Next, let's connect to the MaytronicsOne app.
-
Step 6: Place the robot in the pool Choose a starting spot with at least 3 feet of water so the robot can reach and clean pool areas effectively. Gently lower it into the pool. Cleaning will begin within 30 seconds.
Wireless connections during cleaning The robot does not maintain its Wi-Fi or Bluetooth connection while operating underwater.
Source: Maytronics support. Same steps and facts, rewritten for clarity; the videos and illustrations are Maytronics' own.
By model
This answer on your robot.
Maytronics tags this answer for the 1 model below.
Still need help?
