How do I connect to the Maytronics One App for the first time?

Before you start: The robot does not stay connected to Wi-Fi or Bluetooth while running in the water.

The Maytronics One App lets you pair with Dolphin EON 100, Dolphin Nautilus EON 100, Dolphin Liberty 600, or EON 120d to monitor and adjust your robot’s settings. You can set a weekly cleaning schedule, choose cleaning modes, and access other app features.

Download the app from the Google Play Store or Apple App Store. Turn on Bluetooth on your smartphone before starting.

1. Step 1: Check the charging connection Make sure the robot is disconnected from its charger.

2. Step 2: Create your account Open the Maytronics One App and sign up. Check your email for the validation code, then enter it in the app.

3. Step 3: Enable Bluetooth pairing Press the power button to turn on the robot. Hold the button for 3-5 seconds to enable Bluetooth pairing, then begin pairing in the app.

4. Step 4: Follow the Bluetooth setup prompts Follow the on-screen instructions to connect over Bluetooth. If the app prompts you to update the robot’s software, complete the update.

5. Step 5: Set up Wi-Fi now or later You can finish setup by connecting to Wi-Fi, or skip Wi-Fi pairing and return to it later. Only 2.4 GHz Wi-Fi is supported. If the app gets stuck on a loading screen, go back, select your robot again, and continue.

6. Step 6: Confirm the connection When the connection is established, the LED blinks three times, then stays solid blue.

Reconnecting after cleaning

If the robot was connected previously, it will automatically reconnect to the app after you remove it from the water.

Connecting multiple users

Bluetooth allows up to 1 user to connect at a time. Wi-Fi allows up to 5 users to connect to the robot. You can unpair users who no longer need access in the app settings.