What settings are available on my Liberty 300/400?

Eco Mode

Available on Liberty 200 units manufactured in 2024 or later, plus Liberty 300 and Liberty 400.

Eco Mode schedules automatic cleaning so the robot can stay in the pool for up to a week on one charge. Once set, it cleans the pool floor for up to 40 minutes, 3 times a week.

For LIBERTY 400, the app offers these Floor Only schedules:

• 30 minutes, 4 times a week
• 60 minutes, 2 times a week
• 40 minutes, 3 times a week, the default setting

Set the Eco Mode timer

1. Step 1: Activate Eco Mode Press the Power button. When the battery LED comes on, press and hold the Power button again for 5-8 seconds. The Power button LED will flash purple 3 times, then green 3 times.
2. Step 2: Check the indicator The LED keeps flashing while Eco Mode is on, including during the 48-hour sleep intervals.

To turn off Eco Mode, remove the robot from the pool and connect it to the charger. You can also turn it off by holding the Power button for 4 seconds.

Cycle Selector

Available on Liberty 300 and Liberty 400.

Cycle Selector lets you choose Floor Only cleaning for one charge.

Set the Cycle Selector

1. Step 1: Turn on the robot Press the Power button.
2. Step 2: Select Floor Only cleaning When the battery LED comes on, press and hold the Power button again for 3-5 seconds. The Power button LED will flash purple 3 times.

Pressing the Power button again or connecting the robot to the charger restores the default cleaning mode for the floor, walls and waterline.

End of Cycle Pickup

Available on Liberty 400.

In the final 7 minutes of a cleaning cycle, the robot climbs the walls and pauses at the waterline for 20 seconds so you can pick it up.

Clicker

Available on Liberty 300 and Liberty 400.

Shaking the Clicker in the water calls the robot to the nearest wall. It climbs the wall and waits for pickup.

• Once the cleaning cycle is complete, shake the Clicker in the water for about 3 seconds to send the robot up the nearest wall.
• The cleaning cycle must finish before the Clicker can activate the robot.
• In Regular mode, you can use the Clicker for up to 2 days after the cleaning cycle finishes.

Eco Mode note: The Clicker works between cycles and after the Eco Mode schedule ends. Using the Clicker cancels Eco Mode.

Cleaning modes

Available on Liberty 400.

Use the app to select the Liberty 400 cleaning mode that suits your pool:

• Regular: Cleans the floor, walls and waterline.
• Floor: Cleans only the pool floor.
• Ultra Clean: Provides more thorough cleaning of the floor, walls and waterline.