Troubleshooting · Care & Maintenance
How can I remove something stuck in my Dolphin robot's tracks?
Short answer: Unplug the power supply, turn your Dolphin robot upside down, and check for obstructions or visible damage before removing anything you can reach.
Unplug the power supply from the outlet, then turn the robot upside down and look for anything caught in the tracks, brushes, or crevices.
Based on Maytronics support, updated 2026-04-26, rewritten by Poolbots' pool experts. Parts that fix it are below.
The fix
Step by step.
Our playlist of videos on how to clean your robot's tracks
-
Step 1: Disconnect the power Unplug the power supply from the electrical outlet before inspecting your Dolphin robot.
-
Step 2: Inspect the tracks and brushes Turn the robot upside down. Look over the tracks, brushes, and small crevices for anything caught inside or any visible damage.
-
Step 3: Remove the obstruction if you can reach it If you spot something stuck, try to reach it and remove it if possible.
Source: Maytronics support. Same steps and facts, rewritten for clarity; the videos and illustrations are Maytronics' own.
Replacement parts
Parts that fix this.
This answer comes down to tracks & wheels. The exact part depends on the model: choose your robot and we open its parts list, or browse the category for every model.
Browse by category:Tracks & Wheels All genuine Dolphin parts →
Still need help?
