Support answer · Use & Maintenance
How do I set Eco Mode or other cleaning modes on the Skimmi 300?
Short answer: In the app, tap “>”, choose a cleaning mode, save any Eco mode changes, then tap “Clean” to begin.
Based on Maytronics support, updated 2026-08-10, rewritten by Poolbots' pool experts. Applies to 2 models. Parts that fix it are below.
The answer
What to know.
The default setting is Eco mode. It cleans the full pool surface, edges included, and pauses briefly in the sun to charge.
The other cleaning modes have different priorities:
- Edge-Free mode: Cleans the water surface but skips the edges.
- Leaves Capture mode: Searches for leaves without cleaning the perimeter.
To return from “Edge Free” or “Leaves Capture” to Eco mode, or choose another cleaning mode:
-
Step 1: Open the cleaning mode menu Open the app, then tap the “>” symbol to access the cleaning modes.
-
Step 2: Choose a mode Select Eco mode or the other cleaning mode you want to use.
-
Step 3: Adjust and save Eco mode settings Skimmi 300 offers 3 Eco mode options for adjusting the cleaning and resting intervals. Choose an option, then tap “Save” to store the new Eco mode setting.
-
Step 4: Start cleaning Tap “Clean” to begin the cleaning cycle.
In Eco mode, Skimmi’s battery LEDs flash green every 6 seconds during solar-charging standby between cleaning cycles.
Source: Maytronics support. Same steps and facts, rewritten for clarity; the videos and illustrations are Maytronics' own.
Replacement parts
Parts that fix this.
This answer comes down to filters. The exact part depends on the model: choose your robot and we open its parts list, or browse the category for every model.
Browse by category:Filters All genuine Dolphin parts →
By model
This answer on your robot.
Maytronics tags this answer for the 2 models below.
Still need help?
