Support answer · Skimmi Use & Maintenance
How do I clean my Skimmi?
Short answer: Wipe the Skimmi and its sensors, gently remove any solar panel limescale, and rinse both sides of the filter tray with a garden hose.
Based on Maytronics support, updated 2026-08-10, rewritten by Poolbots' pool experts. Applies to 1 model. Parts that fix it are below.
The answer
What to know.
-
Step 1Wipe the Skimmi and sensors
Use a damp cloth to wipe the Skimmi's surfaces and clean its sensors.
-
Step 2Remove solar panel limescale
If limescale has built up on the solar panel, gently remove it using lemon juice, diluted citric acid, or vinegar.
-
Step 3Rinse the filter tray
Take out the filter tray. Use a garden hose to rinse both sides and wash away the debris. Then put the tray back into the Skimmi.
Off-season storage
If you will not be using your Skimmi for an extended period, follow our off-season storage recommendations. Before putting it away, charge the battery to about 50%.
Keep it in a storage location within the recommended temperature range of -4°F to 104°F.
Source: Maytronics support. Same steps and facts, rewritten for clarity; the videos and illustrations are Maytronics' own.
Replacement parts
Parts that fix this.
This answer comes down to filters. The exact part depends on the model: choose your robot and we open its parts list, or browse the category for every model.
Browse by category:Filters All genuine Dolphin parts →
By model
This answer on your robot.
Maytronics tags this answer for the 1 model below.
Still need help?
