Dolphin Skimmi 300 manual and guides.

Short answer: The Skimmi 300 has four cleaning modes: Edge Free, Leaf Capture, Eco Mode and Edge Cleaning.

The Dolphin Skimmi 300 has four cleaning modes for different pool conditions:

• Edge Free: Quickly skims debris from across the pool surface without specifically targeting the edges.
• Leaf Capture: Focuses on picking up large leaves and floating debris from the surface.
• Eco Mode: Automatically runs scheduled cleaning sessions to maintain the entire pool surface. There are 3 Eco Mode options to adjust the cleaning and resting intervals.
• Edge Cleaning: Uses Wall Wash technology to help clean along pool edges and near the waterline, where debris often gathers.

Open this answer on its own page →

Short answer: Eco Mode offers three cleaning and rest schedules to suit sunlight and cleaning needs, with automatic adjustments between day and night.

Eco Mode on the Skimmi 300 lets you choose from three session types to match the available sunlight and how much cleaning your pool needs.

• Medium sessions, the default: Suited to most environments, this setting balances cleaning with rest. During daylight hours, the robot cleans for 45 minutes, followed by 20 minutes resting in the sun. At night, rest periods automatically increase to 90 minutes.
• Long sessions: Intended for sunny areas, this setting provides longer cleaning periods and shorter rest periods.
• Short sessions: Intended for low-sun conditions, this setting provides shorter cleaning periods and longer rest periods.

The Skimmi 300 automatically adjusts its Eco cycles for daytime and nighttime operation.

Applies to: Dolphin Skimmi 300 and Dolphin Skimmi.

Open this answer on its own page →

Short answer: The Skimmi 300 includes a 6-liter basket, four cleaning modes, app controls, wall-washing technology, solar recharging, and a backup charger.

The Dolphin Skimmi 300 is a robotic skimmer that cleans the pool surface and along pool edges. Its large 6-liter filter basket holds leaves, insects, pollen, and other floating debris.

Cleaning modes and app control

The Skimmi 300 has four cleaning modes:

• Eco Mode: Offers 3 different Eco mode options.
• Edge-Free mode: Cleans the water surface while skipping the edges.
• Leaves Capture mode: Seeks out leaves without cleaning the perimeter.
• Edge Cleaning mode: Targets the pool perimeter, where debris tends to gather.

The app lets you drive the skimmer manually, schedule cleaning, and monitor it. A separate Pick-Up function guides the skimmer toward you so you can remove it from the pool.

Wall-washing technology

The skimmer sprays water onto the pool walls, then gathers the debris.

Solar recharging and backup charging

Smart solar recharge technology keeps the skimmer charged using sunlight. An external charger is also included for backup charging when sunlight is limited.

Obstacle detection and pool coverage

Infrared sensors and navigation algorithms help the skimmer detect walls and obstacles as it moves around the pool. It can run alongside other robotic cleaners or suction systems without interference.

It is designed to cover the entire pool surface quickly across a range of pool shapes, sizes, and seasons.

Applies to: Dolphin Skimmi 300 and Dolphin Skimmi.

Open this answer on its own page →

Short answer: In the app, tap “>”, choose a cleaning mode, save any Eco mode changes, then tap “Clean” to begin.

The default setting is Eco mode. It cleans the full pool surface, edges included, and pauses briefly in the sun to charge.

The other cleaning modes have different priorities:

• Edge-Free mode: Cleans the water surface but skips the edges.
• Leaves Capture mode: Searches for leaves without cleaning the perimeter.

To return from “Edge Free” or “Leaves Capture” to Eco mode, or choose another cleaning mode:

1. Step 1: Open the cleaning mode menu Open the app, then tap the “>” symbol to access the cleaning modes.

2. Step 2: Choose a mode Select Eco mode or the other cleaning mode you want to use.

3. Step 3: Adjust and save Eco mode settings Skimmi 300 offers 3 Eco mode options for adjusting the cleaning and resting intervals. Choose an option, then tap “Save” to store the new Eco mode setting.

4. Step 4: Start cleaning Tap “Clean” to begin the cleaning cycle.

In Eco mode, Skimmi’s battery LEDs flash green every 6 seconds during solar-charging standby between cleaning cycles.

Open this answer on its own page →

Short answer: The Skimmi 300 charges with its built-in solar panel or the included external charger, which is recommended for a full charge on cloudy days.

The Skimmi 200 and 300 have two charging options: built-in solar charging and the included external charger.

Solar charging

Skimmi gives solar power priority. Its built-in panel recharges the battery in sunlight, whether the robot is running or on standby. You can check the charging status in the app.

An energy sensor helps Skimmi find the sunniest area of the pool to get the most from solar charging.

External charger

When Skimmi is connected to the charger, blinking LEDs show the battery level. The LEDs light up as each battery level is reached. Once the battery is fully charged, all LEDs light up, then turn off.

The external charger is the recommended option for a full charge on cloudy days. You can also use it during winter or other periods of limited sunlight to keep Skimmi operating when solar charging conditions are not ideal.

Open this answer on its own page →