Troubleshooting · Skimmi Troubleshooting
Why is my Dolphin Skimmi moving in jerks or making noise?
Short answer: For jerky movement or noise, turn off Smart Detect in the app, then empty and rinse the filter tray.
Start by switching "Smart Detect" OFF in the app.
Based on Maytronics support, updated 2026-04-26, rewritten by Poolbots' pool experts. Applies to 1 model.
The fix
Step by step.
Heavy debris in the water or very strong wind can make it harder for Dolphin Skimmi to navigate, causing jerky movement or noise.
-
Step 1: Turn off Smart Detect in the app Use the app to switch "Smart Detect" OFF.
-
Step 2: Adjust the water-quality setting Within "Smart Detect," choose a lower water-quality setting or switch the function OFF.
-
Step 3: Confirm Smart Detect is off Make sure "Smart Detect" is set to OFF.
-
Step 4: Clean the filter tray Remove the debris from the filter tray, then rinse the tray with a stream of water.
If the front brush makes a squeaking noise, contact Poolbots' pool experts by live chat or phone.
Source: Maytronics support. Same steps and facts, rewritten for clarity; the videos and illustrations are Maytronics' own.
By model
This fix on your robot.
Every model below has its own troubleshooting guide that repeats this fix with the exact parts that fit it. The link opens the guide on this fix.
Still need help?
